Basic Diagnostic Procedure: Procedure: MFD

DIAGNOSTIC PROCEDURE

Step	Check	Yes	No
1 PERFORM CUSTOMER INTERVIEW . Using the Check List for Interview, ask the customer the condition of how trouble occurs. <Ref. to CHECK , Check List for Interview.>	Did you interview the customer?	Go to step 2 .	Interview the customer. <Ref. to CHECK , Check List for Interview.>
2 CHECK CAN COMMUNICATION . Read the DTC of the CAN system using the Subaru Select Monitor. <Ref. to OPERATION , Read Diagnostic Trouble Code (DTC).>	Is DTC displayed?	Perform the diagnosis according to DTC. <Ref. to LIST , List of Diagnostic Trouble Code (DTC).>	Go to step 3 .
3 CHECK MFD . Read the DTC relating the MFD using the Subaru Select Monitor. <Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .>	Is DTC displayed?	Record DTC and time stamp, and perform the diagnosis according to DTC. <Ref. to LIST , List of Diagnostic Trouble Code (DTC).> For time stamp, refer to "LAN SYSTEM". <Ref. to TIME STAMP , CAUTION, General Description.> Go to step 5 .	Go to step 4 .
4 CHECK MFD . Check the MFD display using the system operation check mode of combination meter. <Ref. to SYSTEM OPERATION CHECK MODE .>	Is the display normal?	System is normal.	Replace the MFD. <Ref. to MULTI-FUNCTION DISPLAY (MFD) .>
5 PERFORM DIAGNOSIS . Perform the Clear Memory Mode. Perform the Inspection Mode. <Ref. to INSPECTION MODE .> Read the DTC relating the MFD using the Subaru Select Monitor.	Is DTC displayed?	Perform diagnosis according to the DTC.	Finish the diagnosis.