Combination Meter
DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 PERFORM CUSTOMER INTERVIEW
. Using the Check List for Interview, ask the customer the condition of how trouble occurs. <Ref. to CHECK , Check List for Interview.> |
Did you interview the customer? | Go to step 2 . | Interview the customer. <Ref. to CHECK , Check List for Interview.> |
| 2 CHECK CAN COMMUNICATION
. Read the DTC of the CAN system using the Subaru Select Monitor. <Ref. to OPERATION , Read Diagnostic Trouble Code (DTC).> |
Is DTC displayed? | Perform the diagnosis according to DTC. <Ref. to LIST , List of Diagnostic Trouble Code (DTC).> | Go to step 3 . |
| 3 CHECK COMBINATION METER
. Using the Subaru Select Monitor, read DTC of combination meter. <Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .> |
Is DTC displayed? | Record DTC and time stamp, and perform the diagnosis according to DTC. <Ref. to
LIST
, List of Diagnostic Trouble Code (DTC).> For time stamp, refer to "LAN SYSTEM". <Ref. to
TIME STAMP
, CAUTION, General Description.> Go to step 5 . |
Go to step 4 . |
| 4 CHECK COMBINATION METER
. Check the operation of combination meter. <Ref. to SYSTEM OPERATION CHECK MODE .> |
Is it operating normally? | System is normal. | Replace the combination meter. <Ref. to COMBINATION METER .> |
5 PERFORM DIAGNOSIS
.
|
Is DTC displayed? | Perform diagnosis according to the DTC. | Finish the diagnosis. |