LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> Outback 3.6R Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information Center >> Switches and Harness >> Installation >> Trip Reset Switch

Trip Reset Switch

  1. Install the switch assembly - trip reset.
  2. Install the visor assembly - lower.
  3. Install the cover assembly - instrument panel LWR driver.
  4. Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
scientia non olet · About LEMON Manuals