LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> Outback 3.6R Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information Center >> Switches and Harness >> Installation >> Illumination Control Switch

Illumination Control Switch

  1. Install the illumination control switch.
  2. Install the cover assembly - instrument panel LWR driver.
  3. Connect the ground terminal to battery sensor. <Ref. to NOTE , Repair Contents.>
scientia non olet · About LEMON Manuals