TFT display check

Check the TFT display.

NOTE:

The meter needle indicate 0 or the lowest position.
ILL indication illuminates at the same brightness as immediately before entering "TFT display check".
After No. 6 is displayed in the illumination order, display is repeated from No. 1 again.
The version display contents of the illumination order No. 1 varies depending on the vehicle.

Press the trip reset switch.

After a buzzer sounds for 0.5 seconds and "STEP3" is displayed on TFT, the TFT display check mode is initiated.

Order	TFT display	Warning/indicator light	Time (sec)
1	Version display & black	Light OFF	10
2	Red	Light OFF	10
3	Green	Light OFF	10
4	Blue	Light OFF	10
5	White	Light OFF	10
6	Color gradation	Light OFF	10