LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> BRZ Premium >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Stabilizer Bar >> Removal

Front Stabilizer Bar: Removal

  1. Removal of front tire
  2. Removal of undercover front AL (Refer to REMOVAL )
  3. Removal of undercover COMPL T/M (Refer to REMOVAL )
  4. Removal of undercover front side rear LH
    1. Remove the three clips and remove the undercover front side rear.
    5. Fig 1: Identifying Undercover Front Side Rear Clips
    G08552798Courtesy of SUBARU OF AMERICA, INC.
  5. Removal of undercover front side rear RH
    NOTE: Remove the part in the same manner as LH side.
  6. Removal of front stabilizer link ASSY LH
    1. Secure the stud bolt and remove the nut.
    2. Remove the front stabilizer link ASSY LH from the front shock absorber w/coil spring.
      Fig 2: Removing Front Stabilizer Link Assy LH
      G08552799Courtesy of SUBARU OF AMERICA, INC.
    3. Secure the stud bolt and remove the nut.
    4. Remove the front stabilizer link ASSY LH from the stabilizer bar FR.
      Fig 3: Removing Front Stabilizer Link Assy LH From Stabilizer Bar FR
      G08552800Courtesy of SUBARU OF AMERICA, INC.
  7. Removal of front stabilizer link ASSY RH
    NOTE: Service the RH side in the same procedure as the LH side.
  8. Removal of sub frame COMPL LH
    1. Remove the four bolts, and remove the sub frame COMPL LH with the stabilizer bar FR.
      Fig 4: Identifying Sub Frame COMPL LH Mounting Bolts
      G08552801Courtesy of SUBARU OF AMERICA, INC.
  9. Removal of sub frame COMPL RH
    NOTE: Service the RH side in the same procedure as the LH side.
  10. Removal of front stabilizer bracket No. 2 LH
    1. Remove the bolt and nut, and remove the front stabilizer bracket No. 2 LH.
      Fig 5: Identifying Front Stabilizer Bracket No. 2 LH Mounting Bolt And Nut
      G08552802Courtesy of SUBARU OF AMERICA, INC.
  11. Removal of front stabilizer bracket No. 2 RH
    NOTE: Service the RH side in the same procedure as the LH side.
  12. Removal of stabilizer bar FR
    1. Remove the stabilizer bar FR.
  13. Removal of front stabilizer bar bushing No. 1 (installed on LH side)
    1. Remove the front stabilizer bar bushing No. 1 (installed on LH side) from the stabilizer bar FR.
  14. Removal of front stabilizer bar bushing No. 1 (installed on RH side)
    NOTE:

    Service the RH side in the same procedure as the LH side.

scientia non olet · About LEMON Manuals