LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> BRZ Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transaxle (Service Information)) >> Transmission Valve Body ASSY >> Unit Inspection

Unit Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check of clutch control solenoid No. 1 (SL2)
    1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      Clutch control solenoid No. 1 (SL2) terminal 1 - terminal 2 20°C (68°F) 5.0 to 5.6 Ω
      Fig 1: Measuring Resistance Between Terminals
      G08554399Courtesy of SUBARU OF AMERICA, INC.
    2. Connect the battery positive to terminal 1 of the clutch control solenoid No. 1 (SL2) via the 12 V-21 W valve and check that the valve in the solenoid operates when connecting the battery ground to terminal 2.

      Criteria: Operates (with operating noise)

  2. Check of lock-up control solenoid (SLU)
    1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      Lock-up control solenoid (SLU) terminal 1 - terminal 2 320°C (68°F) 5.0 to 5.6 Ω
    2. Connect the battery positive to terminal 2 of the lock-up control solenoid (SLU) via the 12 V-21 W valve and check that the valve in the solenoid operates when connecting the battery ground to terminal 1.

      Criteria: Operates (with operating noise)

      Fig 2: Checking Of Lock-Up Control Solenoid (SLU)
      G08554400Courtesy of SUBARU OF AMERICA, INC.
  3. Check of line pressure control solenoid ASSY (SLT)
    1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      Line pressure control solenoid ASSY (SLT) terminal 1 - terminal 2 20°C (68°F) 5.0 to 5.6 Ω
      Fig 3: Checking Of Line Pressure Control Solenoid Assy (SLT)
      G08554401Courtesy of SUBARU OF AMERICA, INC.
    2. Connect the battery positive to terminal 2 of the line pressure control solenoid ASSY (SLT) via the 12 V-21 W valve and check that the valve in the solenoid operates when connecting the battery ground to terminal 1.

      Criteria: Operates (with operating noise)

  4. Check of clutch control solenoid No. 1(SL1)
    1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      Clutch control solenoid No. 1 (SL1) terminal 1 - terminal 2 20°C (68°F) 5.0 to 5.6 Ω
      Fig 4: Checking Of Clutch Control Solenoid No. 1 (SL1)
      G08554402Courtesy of SUBARU OF AMERICA, INC.
    2. Connect the battery positive to terminal 1 of the clutch control solenoid No. 1 (SL1) via the 12 V-21 W valve and check that the valve in the solenoid operates when connecting the battery ground to terminal 2.

      Criteria: Operates (with operating noise)

  5. Check of transmission 3 way solenoid ASSY (SR)
    1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      Transmission 3 way solenoid ASSY (SR) connector - body 20°C (68°F) 11 to 15 Ω
    2. Connect the battery positive to the connector of the transmission 3 way solenoid ASSY (SR) and check that the valve in the solenoid operates when connecting the battery ground to the solenoid body.

      Criteria: Operates (with operating noise)

      Fig 5: Checking Of Transmission 3 Way Solenoid Assy (SR)
      G08554403Courtesy of SUBARU OF AMERICA, INC.
  6. Check of transmission 3 way solenoid ASSY (S1)
    1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      Transmission 3 way solenoid ASSY (S1) connector - body 20°C (68°F) 11 to 15 Ω
      Fig 6: Checking Of Transmission 3 Way Solenoid Assy (S1)
      G08554404Courtesy of SUBARU OF AMERICA, INC.
    2. Connect the battery positive to the connector of the transmission 3 way solenoid ASSY (S1) and check that the valve in the solenoid operates when connecting the battery ground to the solenoid body. Criteria: Operates (with operating noise)
  7. Check of transmission 3 way solenoid ASSY (S4)
    1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      Transmission 3 way solenoid ASSY (S4) connector - body 20°C (68°F) 11 to 15 Ω
      Fig 7: Checking Of Transmission 3 Way Solenoid Assy (S4)
      G08554405Courtesy of SUBARU OF AMERICA, INC.
    2. Connect the battery positive to the connector of the transmission 3 way solenoid ASSY (S4) and check that the valve in the solenoid operates when connecting the battery ground to the solenoid body. Criteria: Operates (with operating noise)
  8. Check of transmission 3 way solenoid ASSY (S2)
    1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      Transmission 3 way solenoid ASSY (S2) connector - body 20°C (68°F) 11 to 15 Ω
      Fig 8: Checking Of Transmission 3 Way Solenoid Assy (S2)
      G08554406Courtesy of SUBARU OF AMERICA, INC.
    2. Connect the battery positive to the connector of the transmission 3 way solenoid ASSY (S2) and check that the valve in the solenoid operates when connecting the battery ground to the solenoid body. Criteria: Operates (with operating noise)
  9. Check of transmission 3 way solenoid ASSY (S3)
    1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      Transmission 3 way solenoid ASSY (S3) connector - body 20°C (68°F) 11 to 15 Ω
      Fig 9: Checking Of Transmission 3 Way Solenoid Assy (S3)
      G08554407Courtesy of SUBARU OF AMERICA, INC.
    2. Connect the battery positive to the connector of the transmission 3 way solenoid ASSY (S3) and check that the valve in the solenoid operates when connecting the battery ground to the solenoid body. Criteria: Operates (with operating noise)
scientia non olet · About LEMON Manuals