LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> BRZ Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transaxle (Service Information)) >> Transmission Shift Switch >> Unit Inspection

Unit Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check of transmission shift switch
    1. Resistance inspection
      1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      1 - 3 Pull the shift switch lever RH (+) side. Less than 10 Ω
      Release the shift switch lever. 1 MΩ or more
      1 - 4 Pull the shift switch lever LH (-) side. Less than 10 Ω
      Release the shift switch lever. 1 MΩ or more
      Fig 1: Transmission Shift Switch Terminals Layout
      G08554483Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals