LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> BRZ Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transaxle (Service Information)) >> Speed Sensor >> Unit Inspection

Unit Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Transmission revolution sensor (SP2) check
    1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      Terminal 1 - terminal 2 20°C (68°F) 560 to 680 Ω
      Fig 1: Identifying Transmission Revolution Sensor Terminals (SP2)
      G08554363Courtesy of SUBARU OF AMERICA, INC.
  2. Check of transmission revolution sensor (NT)
    1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      Terminal 1 - terminal 2 20°C (68°F) 560 to 680 Ω
      Fig 2: Identifying Transmission Revolution Sensor Terminals (NT)
      G08554364Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals