LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> BRZ Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transaxle (Service Information)) >> Pattern Select Switch ASSY >> Unit Inspection

Unit Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check of pattern select switch ASSY
    1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      4 - 8 Pattern select (SPORT) switch ON Less than 1 Ω
      4 - 8 Pattern select (SPORT) switch OFF 10 k Ωor more
      6 - 8 Pattern select (SNOW) switch ON Less than 1 Ω
      6 - 8 Pattern select (SNOW) switch OFF 10 k Ωor more
      Fig 1: Pattern Select Switch Assy Terminals Layout
      G08554486Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals