Exhaust Manifold (FA20): Installation

1. Install two new gaskets.
2. Install the exhaust manifold with the six nuts.

   Standard value: T=30N.m {306kgf.cm} {22.1ft.lbf}

3. Install a new gasket to the exhaust pipe SUB-assembly FR installation portion of exhaust manifold.
4. Install the exhaust pipe SUB-assembly FR with the two nuts.

   Standard value: T=35N.m {357kgf.cm} {25.8ft.lbf}

(Refer to INSTALLATION )

(Refer to INSTALLATION )

1. Make sure that there is no exhaust gas leakage from the connections of exhaust pipes and the mounting portion of each sensor.