Power Supply Outlet Socket (Installed To The Rear Side): Removal

Removal of the console box assembly (Refer to REMOVAL )
Removal of power supply outlet socket assembly NO. 1
1. Open the lid of power supply outlet socket assembly NO. 1.
  
  Fig 1: Removing Power Supply Outlet Socket Assembly No. 1
  Courtesy of SUBARU OF AMERICA, INC.
2. Release the 2 claws with a flat tip screwdriver wrapped with protective tape, and remove power supply outlet socket assembly NO. 1.
  
  Fig 2: Releasing Claws With Flat Tip Screwdriver Wrapped With Protective Tape
  Courtesy of SUBARU OF AMERICA, INC.
Removal of power supply outlet socket cover NO. 2
1. Release the 2 claws and remove power supply outlet socket cover NO. 2.
  
  Fig 3: Removing Power Supply Outlet Socket Cover No. 2 And Claws
  Courtesy of SUBARU OF AMERICA, INC.