Unit Inspection

Trip switch inspection

Measure the resistance between the terminals.

RESISTANCE

Inspection terminals (Terminal symbol)	Inspection conditions	Standard value
2(TRIP) - 1	Trip switch OFF →ON	10 kΩ or more →less than 1 Ω
3(DISP) - 1	Display switch OFF →ON	10 kΩ or more →less than 1 Ω
8(CS) - 1	Speed display setting switch OFF→ON	10 kΩ or more →less than 1 Ω

Captions in illustration

Fig 1: Identifying Trip Switch Connector CS, DISP And TRIP Terminals

Courtesy of SUBARU OF AMERICA, INC.