LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> BRZ Premium >> Repair and Diagnosis >> Electrical >> Gauges >> Meter / Gauge System >> Meter & Gauge System >> ECM Terminal Arrangement

ECM Terminal Arrangement

  1. Combination meter ASSY
    1. Input/output signal check
      Fig 1: ECM Connector Terminal Arrangement
      G08557612Courtesy of SUBARU OF AMERICA, INC.
      1. With the connector connected, check each terminal by applying the tester probe from the back of the vehicle wiring harness connector.
      STANDARD VALUE

      Terminal No. (Terminal symbol) Input/Output Item Inspection conditions Standard value
      D7-1 (B) ↔Chassis ground Input Voltage Always 10 to 14 V
      D7-2 (IG+) ↔Chassis ground Input Voltage IG OFF →ON 1 V or less →10 to 14 V
      D7-6 (CANH) ↔Chassis ground Input/Output Waveform Engine stop, IG ON Pulse generation
      D7-7 (CANL) ↔Chassis ground Input/Output Waveform Engine stop, IG ON Pulse generation
      D7-9 (ILL-) ↔Chassis ground Output Voltage IG ON, Light control rheostat OFF →ON 1 V or less →10 to 14 V
      D7-13 (P/SB) ↔Chassis ground Output Voltage IG ON, Passenger's seat occupied and seat belt not buckled →buckled 1 V or less →10 to 14 V
      D7-14 (S) ↔Chassis ground Input Voltage IG ON, Engine pressure warning light ON →OFF 1 V or less →10 to 14 V
      D7-15 (CHG-) ↔Chassis ground Input Voltage Engine start, Charge warning light ON →OFF 1 V or less →10 to 14 V
      D7-17 (LBL) ↔Chassis ground Input Voltage IG ON, Brake fluid level warning light ON →OFF 1 V or less →10 to 14 V
      D7-18 (ILL+) ↔Chassis ground Input Voltage IG ON, Security indicator light Blinking →OFF 1 V or less →10 to 14 V
      D7-19 (LVWG) ↔Chassis ground(1) Input Voltage IG ON, Head light leveling warning light ON →OFF 1 V or less →10 to 14 V
      D7-20 (ES1) ↔Chassis ground - Resistance Always Less than 1 Ω
      D7-21 (LR) ↔Chassis ground Input Voltage IG ON, Turn signal light RH blinking →Turn signal light RH OFF 1 V or less ↔10 to 14 V →1 V or less
      D7-22 (LL) ↔Chassis ground Input Voltage IG ON, Turn signal light LH ON →Turn signal light LH OFF 1 V or less ↔10 to 14 V →1 V or less
      D7-24 (TAM) ↔D7-25 Input Voltage IG ON, Ambient temperature 25°C 1.35 to 1.75 V
      D7-27 (L) ↔D7-28 Input Voltage Fuel F →E 1 V or less →4.5 to 9 V
      D7-30 (E) ↔Chassis ground - Resistance Always Less than 1 Ω
      D7-31 (TR) ↔Chassis ground - Resistance Light control rheostat upper fully open →Light control rheostat lower fully open 510Ω→100 Ω
      D7-32 (T) ↔Chassis ground - Voltage IG OFF →ON 1 V or less →10 to 14 V
      D7-33 (TC) ↔Chassis ground - Resistance Light control rheostat upper fully open →Light control rheostat lower fully open Less than 1 Ω→10 kΩ or more
      D7-34 (DISP) ↔Chassis ground - Resistance DISP switch ON →OFF Less than 1 Ω→10 kΩ or more
      D7-35 (CS) ↔Chassis ground Input Resistance Speed unit display changeover switch ON: km/h OFF: MPH Less than 1 Ω→10 kΩ or more
      D7-36 (TRIP) ↔Chassis ground - Resistance ODO/TRIP switch ON →OFF Less than 1 Ω↔10 kΩ or more
      D7-37 (DBKL) ↔Chassis ground Input Voltage IG ON, driver's seat belt not buckled →Buckled 1 V or less →10 to 14 V
      D7-38 (PBKL) ↔Chassis ground Input Voltage IG ON, passenger's seat occupied, and seat belt not buckled →buckled 1 V or less →11 to 14 V
      D7-40 (ES2) ↔Chassis ground - Resistance Always Less than 1 Ω
      (1) Headlight discharge type