LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> BRZ Premium >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Engine Immobilizer System (W/ Entry Start) >> Engine Immobilizer System (With Entry & Start System) >> DTC Check / Clear

DTC Check / Clear

  1. CHECK FOR IMMOBILISER DTC
    1. Connect the SSM3 to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the SSM3 on.
    4. Enter the following menus: [Keyless access system]→ [Collation ECM] →[Diagnostic Code(s) Display]
    5. Check for DTCs.
  2. CHECK FOR ECM DTC
    1. Connect the SSM3 to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the SSM3 on.
    4. Enter the following menus: [Engine Control System] →[Diagnostic Code(s) Display]
    5. Check for DTCs.
  3. CLEAR IMMOBILISER DTC
    1. Connect the SSM3 to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the SSM3 on.
    4. Enter the following menus: [Keyless access system]→ [Collation ECM] →[Clear Memory]
    5. Clear the DTCs.
  4. CLEAR ECM DTC
    1. Connect the SSM3 to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the SSM3 on.
    4. Enter the following menus: [Engine Control System] →[Clear Memory]
    5. Clear the DTCs.
scientia non olet · About LEMON Manuals