LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> BRZ Premium >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System (Interior) >> Parts Location >> Current Data Display & Save/Work Support

Current Data Display & Save/Work Support

  1. Inspection with SSM3 ([Current Data Display & Save])
    1. On the SSM3, navigate to the [Current Data Display & Save] display, and check the computer data.
      SSM3 SCREEN: [EACH SYSTEM CHECK]→ [INTEG. UNIT MODE]→ [CURRENT DATA DISPLAY & SAVE]

      Item Name Description/display range Normal value Remarks
      [D Door Courtesy] Status of the front door courtesy light switch assembly RH Display range: [Close]-[Open] Close: the driver side door is closed
      Open: the driver side door is opened      		 -
      [D Door Lock Pos] Lock/unlock status of the driver's side door Display range: [Lock]-[Unlock] [Lock]: When the driver's side door is locked
      [Unlock]: When the driver's side door is unlocked      		 -
      [P Door Courtesy] Status of the front door courtesy light switch assembly LH Display range: [Close]-[Open] [Close]: When the passenger's side door is closed
      [Open]: When the passenger's side door is open      		 -
      [P Door Lock Pos] Lock/unlock status of the passenger's side door Display range: [Lock]-[Unlock] [Lock]: When the passenger's side door is locked
      [Unlock]: When the passenger's side door is unlocked      		 -
      [Luggage Courtesy SW] Status of the trunk lock assembly Display range: [Close]-[Open] Close: The trunk is closed.
      Open: The trunk is open.      		 -
      [Ignition] Status of the IG signal Display range: OFF - ON [OFF]: IG OFF
      [ON]: IG ON      		 This item will be displayed as [OFF] in the ACC ON status.
      [ACC SW] Status of the ACC signal Display range: OFF - ON OFF: ACC OFF
      ON: ACC ON or IG ON      		 This item will be displayed as [ON] in the IG ON status.
      [Room lamp output] Status of the map light assembly Display range: OFF - ON [OFF]: Map light assembly OFF
      [ON]: Map light assembly ON      		 -
      [key illumi. lamp o/p] Status of the key cylinder light Display range: OFF - ON [OFF]: Key cylinder light OFF
      [ON]: Key cylinder light ON      		 -
      [D-Door Courtesy Lamp] Status of the driver's side courtesy light assembly Display range: OFF - ON [OFF]: Driver's side courtesy light assembly OFF
      [ON]: Driver's side courtesy light assembly ON      		 -
      [P-Door Courtesy Lamp] Status of the passenger's side courtesy light assembly Display range: OFF - ON [OFF]: Passenger's side courtesy light assembly OFF
      [ON]: Passenger's side courtesy light assembly ON      		 -
  2. Inspection with SSM3 ([Work Support])
    1. On the SSM3, navigate to the [Work Support] display, and check the displayed data.
      SSM3 SCREEN: [EACH SYSTEM CHECK]→ [INTEG. UNIT MODE]→ [WORK SUPPORT]→ [SYSTEM OPERATION CHECK MODE]

      Item Name Item description Drive
      [Illuminated Entry System](1) The lights controlled by the illuminated entry system are turned on OFF/ON
      [D-Door Courtesy Lamp] The driver's side courtesy light assembly is turned on OFF/ON
      [P-Door Courtesy Lamp] The passenger's side courtesy light assembly is turned on OFF/ON
      [Key illumi. Lamp] The key cylinder light is turned on OFF/ON
      (1) Perform the inspection with the change switch of the map light assembly set to the DOOR mode.
      SSM3 SCREEN: [EACH SYSTEM CHECK]→ [INTEG. UNIT MODE]→ [WORK SUPPORT]→ [SYSTEM OPERATION CHECK MODE]

      Item Name Item description Drive
      [Key illumi. Lamp] Turn on the text illumination of the push button start switch. Stop/output
scientia non olet · About LEMON Manuals