Light Control Rheostat: Removal

Removal of instrument side panel LH (Refer to DISASSEMBLY )
Removal of the instrument panel under cover SUB-ASSY NO. 1
1. Remove the 2 screws.
  
  Fig 1: Locating Instrument Panel Under Cover Sub-Assembly No. 1 Mounting Bolts
  Courtesy of SUBARU OF AMERICA, INC.
2. Release four claws and four clips, and disconnect the instrument panel under cover SUB-ASSY NO. 1.
3. Disconnect the connector, and remove the instrument panel under cover SUB-ASSY NO. 1
  
  Fig 2: Identifying Instrument Panel Under Cover Sub-Assembly No. 1 Claw And Clips
  Courtesy of SUBARU OF AMERICA, INC.
Removal of the light control rheostat
1. Release two claws and remove the light control rheostat.
  
  Fig 3: Identifying Light Control Rheostat Claws
  Courtesy of SUBARU OF AMERICA, INC.