LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> BRZ Premium >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (Exterior) >> Lighting system >> Current data display & save / System operation check mode

Current data display & save / System operation check mode

  1. Inspection with SSM3
    1. Data monitor
      1. Use the SSM3 and data monitor to determine functionality and narrow down the defective part.
      SSM3 SCREEN: [EACH SYSTEM CHECK]→ [INTEG. UNIT MODE]→ [CURRENT DATA DISPLAY & SAVE]

      Item Name Description/display range Normal value Remarks
      [Ignition] Status of the IG signal
      Display range: OFF - ON      		 [OFF]: IG OFF
      [ON]: IG ON      		 -
      [ACC SW] Status of the ACC signal
      Display range: OFF - ON      		 OFF: ACC OFF
      [ON]: ACC ON      		 -
      [Dimmer] Headlight dimmer switch (HI) status
      Display range: OFF - ON      		 OFF: the dimmer switch is OFF
      ON: the dimmer switch is HI      		 -
      [Passing Light SW] Headlight dimmer switch (flashing) status
      Display range: OFF - ON      		 OFF: the headlight dimmer switch (flashing) is OFF
      ON: the headlight dimmer switch (flashing) is ON      		 -
      [Lighting I Lamp Output] Light control switch (TAIL) status
      Display range: OFF - ON      		 OFF: the light control switch (TAIL) is OFF
      ON: the light control switch (TAIL) is ON      		 -
      [Lighting II Lamp Output] Light control switch (HEAD) status
      Display range: OFF - ON      		 OFF: the light control switch (HEAD) is OFF
      ON: the light control switch (HEAD) is ON      		 -
      [Lighting Hi Lamp Output] Headlight HI beam status
      Display range: OFF - ON      		 OFF: Normal
      ON: Headlight HI beam is lit up      		 -
      [Rear Fog Light SW] Rear fog light switch status
      Display range: OFF - ON      		 OFF: the rear fog light switch is OFF
      ON: the rear fog light switch is ON      		 -
      [Front Fog Light SW] Front fog light switch status
      Display range: OFF - ON      		 OFF: the front fog light switch is OFF
      ON: the front fog light switch is ON      		 -
      [R fog lamp output] Rear fog light status
      Display range: OFF - ON      		 OFF: the rear fog light is OFF
      ON: the rear fog light is ON      		 -
      [Front Fog Lamp] Front fog lights status
      Display range: OFF - ON      		 OFF: the front fog light is OFF
      ON: the front fog light is ON      		 -
      [Auto Light SW] Light control switch (AUTO) status
      Display range: OFF - ON      		 OFF: the light control switch is OFF
      ON: the light control switch is AUTO      		 -
      [Head Light Switch (H)] Light control switch (HEAD) status
      Display range: OFF - ON      		 OFF: the light control switch is OFF
      ON: the light control switch is HEAD      		 -
      [Tail Light Switch (T)] Light control switch (TAIL) status
      Display range: OFF - ON      		 OFF: the light control switch is OFF
      ON: the light control switch is TAIL      		 -
      [D Door Courtesy] Driver's seat door courtesy light switch status
      Display range: Open - Close      		 Open: the driver side door is opened
      Close: the driver side door is closed      		 -
      [Illumination Rate Info] Automatic light control sensor status
      Display range: 0 to 65535      		 Outputs a number according to the brightness (in units of lx) If there is no light, 0 will be displayed.
      [Sensitivity] Sensitivity of the automatic light control system / Light2, Light1, Normal, Dark1 or Dark2 Customize setting displayed -
      [DRL Function] DRL function / ON or OFF Customize setting displayed -
      [DRL Output] DRL output / ON or OFF ON: DRL output
      OFF: Normal      		 -
      [Light Auto OFF Delay] Light auto OFF delay / Off, 30 s, 60 s or 90 s Customize setting displayed -
      CAUTION: Items without settings are not displayed in the SSM3 or do not function.
    2. [System Operation Check Mode]
      1. Use the SSM3 and the System Operation Inspection Mode to determine functionality and narrow down the defective part.
      SSM3 SCREEN: [EACH SYSTEM CHECK]→ [INTEG. UNIT MODE]→ [WORK SUPPORT]→ [SYSTEM OPERATION CHECK MODE]

      Item Name Item description Drive
      [Daytime Running Light] Daytime running lights ON/OFF
      [Taillight Relay] Turn on the tail lights. OFF - ON
      [Headlight Relay] Turn on the headlight LO beams. OFF - ON
      [Head Light Hi] Turn on the headlight HI beams. OFF - ON
      [Front Fog Lamp Output] Turn on the front fog lights. OFF - ON
      [Rear Fog Light Relay] Turn on the rear fog light. OFF - ON
      *1: Perform operation confirmation when the tail lights are on.
      CAUTION: Items without settings are not displayed in the SSM3 or do not function.
scientia non olet · About LEMON Manuals