| Speedometer |
Displayed vehicle speed is faster or slower than the actual speed. |
Data from the brake actuator assembly may have been lost. |
System is normal. |
Also, check vehicle speed pulse circuit. |
| Fuel gauge |
Fuel is present, but the fuel level is lower than the actual level. |
Communication error may have occurred. |
System is normal. |
Also, check the fuel gauge. |
| Fuel level warning light |
Fuel is present, but the light illuminates. |
Communication error may have occurred. |
System is normal. |
Also, check the fuel gauge. |
| Engine coolant temperature light |
Engine coolant temperature light blinks in red and blue alternately. |
Communication error may have occurred. |
System is normal. |
Check the engine coolant light system. |
| VDC indicator |
Illuminating. |
Communication error may have occurred. |
System is normal. |
Check if VDC is not operating. |
| VDC OFF indicator |
Illuminating. |
Communication error may have occurred. |
System is normal. |
Check that VDC is not OFF. |
| Brake warning light |
Illuminating. |
Brake fluid may be low or communication error may have occurred. |
System is normal. |
Check the brake system. |
| Shift position |
Not displayed. |
Communication error may have occurred. |
System is normal. |
Also, check AT system. |
| AT temperature light |
Blinking. |
Communication error may have occurred. |
System is normal. |
Also, check AT system. |
| Door indicator |
Does not go on, or does not go off with the doors closed. |
Communication error may have occurred. |
System is normal. |
Also, check the door switch. |
| Clearance indicator |
Not illuminating. |
Communication error may have occurred. |
System is normal. |
Also, check the combination switch. |
| High beam indicator |
Not illuminating. |
Communication error may have occurred. |
System is normal. |
Also, check the combination switch. |
| Front fog indicator |
Not illuminating. |
Communication error may have occurred. |
System is normal. |
Also, check the combination switch. |
| Illumination |
Illuminating at the maximum brightness. |
Communication error may have occurred. |
System is normal. |
Also, check the illumination switch. |