LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback F6-3.6L DOHC >> Repair and Diagnosis >> Transmission and Drivetrain >> Transmission Control Systems >> Sensors and Switches - Transmission and Drivetrain >> Sensors and Switches - M/T >> Gear Sensor/Switch >> Service and Repair >> Removal

Removal

Switches and Harness

REMOVAL

BACK-UP LIGHT AND NEUTRAL POSITION SWITCH

1) Disconnect the ground cable from battery.
2) Remove the air intake boot assembly.
3) Disconnect the connector back-up light switch & neutral position switch.





4) Lift up the vehicle.
5) Remove the back-up light switch & neutral position switch with the harness.






scientia non olet · About LEMON Manuals