LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Mechanical (H4DO) >> V-belt >> Removal >> V-Belt TENSIONER Assembly And Idler Pulley

V-Belt TENSIONER Assembly And Idler Pulley

  1. Remove the V-belts. Refer to V-BELT .
  2. Remove the bolt securing the V-belt tensioner assembly to the power steering pump bracket, and remove the V-belt tensioner assembly.
    Fig 1: Locating V-Belt Tensioner Assembly And Idler Pulley
    G08580055Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the bolts which secure the idler pulley to the chain cover, and remove the idler pulley.
    Fig 2: Locating Idler Pulley To Chain Cover Mounting Bolts
    G08580056Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals