Brake Warning Light, Electronic Parking Brake Warning Light And Hill Hold Indicator Light Do Not Come On: Trouble Symptom
When the ignition switch is turned to ON (engine OFF), brake warning light, electronic parking brake warning light (C6 model only) and hill hold indicator light do not come on.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK OTHER INDICATOR LIGHT. Turn the ignition switch to ON. |
Does other indicator light illuminate soon after "ON"? | Go to step 2 . | Perform the diagnosis for combination meter. < Refer to SELF-DIAGNOSIS DISPLAY MODE , OPERATION, Combination Meter System. > |
| 2 CHECK LAN SYSTEM. Check the DTC in LAN system. < Refer to READ DIAGNOSTIC TROUBLE CODE (DTC) . > |
Is DTC of LAN system displayed? | Perform the diagnosis according to DTC. < Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . > | Replace the combination meter case assembly. < Refer to REMOVAL , Combination Meter. > |