LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tires, Wheels & Tire Pressure Monitoring System (TPMS) >> Tire Pressure Monitoring System >> Removal >> Outback Model

Outback Model

  1. Disconnect the ground cable from battery.
  2. Remove the rear quarter trim LH. < Refer to REMOVAL , Rear Quarter Trim. >
  3. Remove the TPMS & keyless control module.
    1. Disconnect the connector.
    2. Remove the bolt and then remove the TPMS & keyless control module.
      Fig 1: Disconnecting TPMS & Keyless Control Module Connector (OUTBACK Model)
      G06653940Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals