Tire Pressure Warning Light Does Not Come Off: Trouble Symptom
Tire pressure warning light remains illuminating after engine starts.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK DTC. Connect the Subaru Select Monitor, and read the Diagnostic Trouble Code. < Refer to OPERATION , Read Diagnostic Trouble Code (DTC). > |
Is a DTC displayed? | Perform the diagnosis according to the DTC. < Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . > | Go to step 2 . |
| 2 CHECK TRANSMITTER (ID). Display the transmitter ID of the tire pressure monitor system. |
Is the transmitter ID registered? | Go to step 3 . | Register the transmitter ID. < Refer to OPERATION , Register Transmitter (ID). > |
3 CHECK TRANSMITTER DATA OUTPUT.
|
Is the warning light output ON? | Replace the TPMS & keyless entry CM or TPMS CM. < Refer to REMOVAL , Tire Pressure Monitoring System. > | Replace the combination meter. < Refer to REMOVAL , Combination Meter. > |