Display of Status Information: Operation

Check the operating condition of each sensor in the event of malfunction in the seat belt buckle switch, or when the seat belt buckle switch has been replaced.

1. On «Main Menu» display, select {Each System Check}.
2. On «System Selection Menu» display, select {Airbag System}.
3. On «Airbag System» display, select {Current Data Display & Save}.

   The following table is for support data.

   Item	Display	Note
   Trip Count	-	-
   Count	-	-
   Time Count	-	-
   Belt Buckle Switch RH	Unbelted/Belted	"Belted" when passenger's seat belt is fastened "Unbelted" when passenger's seat belt is not fastened
   Passenger Occupant Status	Adult/Child/Empty or CRS	"Adult" when the occupant is present "Child" or "Empty or CRS" when the seat is unoccupied or when child restraint seat is installed
   Passenger Airbag Status	ON/OFF	"ON" when the passenger occupant status is "Occupied" "OFF" when the status is "Empty or CRS"

   NOTE: For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".