Roll Connector: Adjustment
CAUTION:
- Do not rotate the roll connector to more than the specified number of turns. Otherwise, the roll connector internal wire may be broken.
- When determining the end stop, rotate the connector slowly without applying excessive force. Applying excessive force at the end stop may break the internal wire.
- Check that front wheels are positioned in straight ahead direction.
- Rotate the roll connector counterclockwise until it stops.
- Rotate the roll connector clockwise approx. 2.5 turns until "Δ" marks are aligned.NOTE: When the roll connector comes to the center position, the orange roller (b) can be seen from the sight glass (a).