LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System >> Inspection Locations after a Collision >> Inspection >> Side Airbag Module

Side Airbag Module

  1. Side impact (side airbag activated)
    1. Replace the following parts with new ones.
      • Airbag control module
      • Front door impact sensor
      • Side airbag module assembly
      • Side airbag sensor
      • Curtain airbag module assembly
      • Curtain airbag sensor
      • Seat belt pretensioner assembly
      • Lap seat belt pretensioner assembly
      • Backrest pad assembly
      • Backrest frame assembly
      • Backrest cover assembly
    2. Visually inspect the following items and replace any damaged part with a new one.
      • Headrest assembly
      • Headrest lock bushing
      • Outer slide rail
      • Inner slide rail
      • Seat hinge cover
      • Seat lifter lever
      • Reclining lever
      • Side airbag harness and connector on body side
  2. Side impact (side airbag not activated)

    Visually inspect the following items and replace any damaged or cracked part with a new one. Specially inspect the damage of airbag module body, mounting bracket and harness connector.

    • Backrest pad assembly
    • Backrest frame assembly
    • Backrest cover assembly
    • Front door impact sensor
    • Side airbag module assembly
    • Side airbag sensor
    • Curtain airbag module assembly
    • Curtain airbag sensor
    • Seat belt pretensioner assembly
    • Lap seat belt pretensioner assembly
  3. No side impact

    Visually inspect the airbag modules for contamination and replace any faulty part with a new one.