Driver's Airbag Module

Frontal collision (driver's airbag module activated)
1. Replace the following parts with new ones.
  - Airbag control module
  - Driver's airbag module assembly
  - Passenger's airbag module assembly
  - Curtain airbag module assembly (when activated)
  - Seat belt pretensioner assembly (left and right)
  - Lap seat belt pretensioner assembly (left and right)
  - Front sub sensor (right and left)
  - Sensor cover plate (left and right)
  - Steering shaft assembly
2. Visually inspect the following items and replace any damaged part with a new one.
  - Steering wheel assembly
  - Steering support beam assembly
  - Instrument panel harness and connector on body side
Frontal collision (driver's airbag module not activated)
Visually inspect the following items and replace any damaged or cracked part with a new one. Specially inspect the damage of airbag module body, mounting bracket and harness connector.
- Driver's airbag module assembly
- Passenger's airbag module assembly
- Curtain airbag module assembly (left and right)
- Seat belt pretensioner assembly (left and right)
- Lap seat belt pretensioner assembly (left and right)
- Front sub sensor (right and left)
- Sensor cover plate (left and right)
- Instrument panel assembly (because it is integrated with passenger's airbag module)
No frontal collision
Visually inspect the airbag modules for damage or contamination and replace any faulty part with a new one.