LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System >> Inspection Locations after a Collision >> Inspection >> Curtain Airbag Module

Curtain Airbag Module

  1. Side impact (curtain airbag activated)
    1. Replace the following parts with new ones.
      • Airbag control module
      • Curtain airbag module assembly
      • Front door impact sensor
      • Side airbag sensor
      • Curtain airbag sensor
      • Seat belt pretensioner assembly
      • Lap seat belt pretensioner assembly
      • Roof trim
      • Each pillar trim
      • Airbag bracket (model with sunroof)
    2. Visually inspect the following items and replace any damaged part with a new one.
      • Assist grip
      • Assist grip bracket
      • Curtain airbag harness and connector on body side.
  2. Side impact (side airbag not activated)

    Visually inspect the following items and replace any damaged or cracked part with a new one. Specially inspect the damage of airbag module body, mounting bracket and harness connector.

    • Roof trim
    • Each pillar trim
    • Curtain airbag module assembly
    • Seat belt pretensioner assembly
    • Lap seat belt pretensioner assembly
    • Front Door Impact Sensor
    • Side airbag sensor
    • Curtain airbag sensor
  3. No side impact

    Visually inspect the airbag covers for damage or contamination and replace any faulty part with a new one.