Curtain Airbag Sensor: Installation

CAUTION:

Always replace with the specified new bolts and nuts.

When installing the sensor, insert the set pin on the backside of the sensor into the hole on the body side securely.

Before installation, inspect the following items and replace any faulty part with a new one.
- Curtain airbag sensor or connector is damaged.
- Curtain airbag has been activated.
Install each part in the reverse order of removal.
CAUTION: If the hook is disconnected from the vehicle body, replace the hook with the new part to prevent the decline of the fixed force of the seat.

Fig 1: Identifying Rear Seat Cushion Assembly Hook
Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

Curtain airbag sensor: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)