LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System >> Airbag Connector >> Procedure >> Power Supply

Power Supply

  1. How to disconnect:
    CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
    1. Push the lock (A).
    2. While holding down the lock (A), disconnect the connector.
      Fig 1: Disconnecting Airbag Connector
      G06653079Courtesy of SUBARU OF AMERICA, INC.
  2. How to connect:
    CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.

    Holding the connector, push it in securely until a clicking sound is heard.

    Fig 2: Caution For Inserting Connector
    G06653080Courtesy of SUBARU OF AMERICA, INC.