DRIVER' Airbag Module, Curtain Airbag Module, PRETENSIONER & Lap Seat Belt PRETENSIONER

How to disconnect:
1. Using a flat tip screwdriver, pry the push lock upward to unlock.
2. Pull the connector to disconnect from the driver's airbag module assembly or the retractor assembly.
  
  Fig 1: Pulling Connector To Disconnect From Driver's Airbag Module Assembly Or Retractor Assembly Using Flat Tip Screwdriver
  Courtesy of SUBARU OF AMERICA, INC.
How to connect:
CAUTION:
- Be sure to insert the connector in until it is locked.
- Be sure to push the push lock in securely. Then pull it gently to make sure that it is locked.
  
  Fig 2: Pushing Airbag Connector Push Lock
  Courtesy of SUBARU OF AMERICA, INC.
Connect the connector in the reverse order of disconnecting. At this time, be sure to insert it until a clicking sound is heard.