Detecting Condition
- Airbag warning light is faulty.
- Airbag control module to combination meter circuit is shorted or open.
- Grounding circuit is faulty.
- Airbag control module is faulty.
- Connector connection is improper.
- Connections of (AB6, AB17, AB18) to airbag control module are improper.
CAUTION:
Before performing diagnosis, refer to CAUTION .
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK CAN COMMUNICATION. Inspect LAN system. Refer to PROCEDURE . |
Is there any fault? | Repair it according to diagnosis of LAN system. | Go to step 2 . |
2 CHECK DTC.
|
Is there poor contact of connector? | Reconnect the connector. Or repair the connector. | Go to step 3 . |
| 3 CHECK FOR POOR CONTACT. Check the combination meter. Refer to SELF-DIAGNOSIS DISPLAY MODE . |
Is there any fault? | Replace the combination meter. Refer to REMOVAL . | Replace the airbag CM. Refer to REMOVAL . |