Seat Belt

Check installation condition of seat belt.
Pull out the seat belt and then release it. Check that the belt retracts smoothly.
Check that the ALR seat belt operates normally.
Check seat belt warning function.
1. Turn the ignition switch to ON with the driver's and passenger's seat belt detached.
2. Check the driver's and passenger's seat belt warning light blink for approx. 6 seconds and the buzzer sounds intermittently.
3. Then, check the seat belt warning light illuminates and blinks repeatedly at a cycle of approx. 15 seconds. (If no passenger is on the passenger's seat, the seat belt warning light on passenger's seat does not operate.)
4. When the driver's seat belt is fastened, check that the driver's seat belt warning light turns off.
5. When the passenger's seat belt is fastened, check that the passenger's seat belt warning light turns off. (If no passenger is on the passenger's seat, the seat belt warning light on passenger's seat does not operate.)