LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System (Heater, Ventilator And A/C) >> Control Panel >> Inspection >> Check Illumination

Check Illumination

  1. Check the illumination operation when battery voltage is applied between the terminals of control panel.
    • Auto A/C model
      Terminal No. Inspection conditions Specification Connection diagram
      3 (+) - 9 (-) Connect battery to the terminals Light ON
      G08348689
    • Manual A/C model
      Terminal No. Inspection conditions Specification Connection diagram
      2 (+) - 10 (-) Connect battery to the terminals Light ON
      G08348690
  2. If the illumination does not operate normally, replace the control panel.
scientia non olet · About LEMON Manuals