LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System (Heater, Ventilator And A/C) >> Compressor Oil >> Procedure

Compressor Oil: Procedure

NOTE: Before making repairs, perform the oil return operation to return the compressor oil in circulation with the refrigerant to the compressor.
  1. Increase the engine to 1, 500 rpm.
  2. Turn the A/C switch to ON.
  3. Set the temperature control switch or dial to LO (MAX COOL).
  4. Turn the FRESH/RECIRC switch to RECIRC position.
  5. Turn the fan switch or dial to HI (MAX).
  6. Leave in this condition for 10 minutes.
scientia non olet · About LEMON Manuals