LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Manual Transaxle & Differential) >> Transmission Gear Oil >> Inspection

Transmission Gear Oil: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Park the vehicle on a level surface.
  2. Turn the ignition switch to OFF, and wait until the engine cools.
  3. Remove the oil level gauge and wipe it clean.
  4. Reinsert the oil level gauge all the way. Be sure that the oil level gauge is correctly inserted in the proper direction.
  5. Pull out the oil level gauge again, and check the oil level. If it is below the lower level, add oil through the oil level gauge hole to bring the level up to the upper level.
    Fig 1: Identifying Upper And Lower Oil Level Lines On Oil Level Gauge
    G08581902Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals