Transfer Driven Gear: Disassembly

WARNING: This page is about a different variant/trim than selected.

Using the ST, remove the roller bearing (extension case side).
ST 498077000 REMOVER

Fig 1: Removing Extension Case Side Roller Bearing Using Remover
Courtesy of SUBARU OF AMERICA, INC.
Using ST1 and ST2, remove the roller bearing (transfer case side).
ST1 498077000 REMOVER

ST2 899864100 REMOVER

Fig 2: Removing Transfer Case Side Roller Bearing Using Removers
Courtesy of SUBARU OF AMERICA, INC.