LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Cooling System (H6DO)) >> Reservoir Tank >> Removal

Reservoir Tank: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Pull out the over flow hose.
  2. Remove bolts which secure the reservoir tank, and remove the reservoir tank.
    Fig 1: Locating Reservoir Tank Mounting Bolts
    G06651537Courtesy of SUBARU OF AMERICA, INC.