LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Cooling System (H6DO)) >> Engine Coolant >> Replacement >> Draining Of Engine Coolant

Draining Of Engine Coolant

WARNING: This page is about a different variant/trim than selected.
  1. Lift up the vehicle.
  2. Remove the under cover. Refer to REMOVAL .
  3. Remove the drain plug to drain engine coolant into container.
    NOTE: Remove the radiator cap so that engine coolant will drain faster.
    Fig 1: Locating Drain Plug
    G06651495Courtesy of SUBARU OF AMERICA, INC.
  4. Install the drain plug.
  5. Install the under cover. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals