Installation Of Evaporation Pipe

WARNING: This page is about a different variant/trim than selected.

Install the evaporation pipe to the vehicle.

Fig 1: Locating Evaporation Pipe Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the evaporation pipe protector.
Tightening torque:

T1: 1 N.m (0.1 kgf-m, 0.7 ft-lb)

T2: 7.5 N.m (0.7 kgf-m, 5.4 ft-lb)

Fig 2: Locating Evaporation Pipe Protector Mounting Bolts With Torque Specifications
Courtesy of SUBARU OF AMERICA, INC.
Install the trunk side trim panel assembly - side on RH side. Refer to INSTALLATION .
Install the evaporation hose.

Fig 3: Locating Evaporation Pipe
Courtesy of SUBARU OF AMERICA, INC.
Install the rear mud guard RH. Refer to INSTALLATION .