Connecting The Fuel Delivery Hose And Fuel Hose
WARNING: This page is about a different variant/trim than selected.
Connect the fuel delivery hose as shown in the figure.
CAUTION:
- If the connection portion has a spool or stopper, do not allow the end of the hose to bend or ride over by inserting the hose too deep.
- Be sure to inspect hoses and their connections for any leakage of fuel.
NOTE:
Use new fuel delivery hose and fuel hose.
Tightening torque:
1.25 N.m (0.1 kgf-m, 0.9 ft-lb)
L1: 2.5±1.5 mm (0.098±0.059 in)
L2: 22.5±2.5 mm (0.886±0.098 in)