Enable Conditions
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITIONS
| Secondary Parameters | Enable Conditions |
|---|---|
| < Timer diagnosis > | |
| Battery voltage | ≥ 10.9 V |
| Ignition switch | OFF |
| Elapsed time after starting the engine | > 600 s |
| < Full count diagnosis & soaking timer IC setting diagnosis> | |
| Battery voltage | ≥ 10.9 V |
| Ignition switch | OFF |
| < Timer diagnosis (during soaking) > | |
| Battery voltage | ≥ 10.9 V |
| Ignition switch | OFF |
| Number of wake-up | = 1, 2, 3, 4, 6, 8 time(s) |
| < Wake-up diagnosis > | |
| Ignition switch | ON |
| Wake-up activation time setting | Completed |
| Time in the soaking timer IC | > 3600 s |