Enable Conditions
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITIONS
| Secondary Parameters | Enable Conditions |
|---|---|
| < Common conditions > | |
| Battery voltage | ≥ 10.9 V |
| Atmospheric pressure | > 75 kPa (563 mmHg, 22.2 inHg) |
| < First diagnosis > | |
| Learning value of EVAP conc. during purge | < 0.2 |
| Total time of canister purge operation | ≥ 120 s |
| < Second diagnosis > | |
| Time after cancel of second diagnosis | ≥ 60000 ms |
| Total time of canister purge operation | ≥ 120 s |
| Intake manifold pressure (absolute pressure) | > 13.3 kPa (100 mmHg, 3.9 inHg) |
| Engine speed | ≥ 1050 rpm |
| Intake manifold pressure (relative pressure) | < 13.3 kPa (100 mmHg, 3.9 inHg) |
| Vehicle speed | ≥ 30 km/h (18.6 MPH) |
| Closed air/fuel ratio control | In operation |
| Air fuel ratio | > 0.76 |
| and | |
| < 1.25 | |
| Main feedback compensation coefficient | > 0.9 |
| Learning value of EVAP conc. during purge | < 0.2 |