LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Diagnostic Trouble Code (DTC) Detecting Criteria (H6DO)) >> Diagnostic Trouble Code (DTC) Detecting Criteria >> DTC P0366 Camshaft Position Sensor B Circuit Range/Performance (Bank 1) >> Diagnostic Method

Diagnostic Method

WARNING: This page is about a different variant/trim than selected.

Judge as NG when the status where the number of camshaft position sensor signal in two crankshaft revolutions is other than 3 time(s).

JUDGMENT VALUE

Malfunction Criteria Threshold Value
Amount of camshaft sensor signal during 2 revs of crankshaft. 3 time(s)

Time Needed for Diagnosis:  Engine two revolutions x 4 time(s)

Malfunction Indicator Light Illumination:  Illuminates as soon as a malfunction occurs.

Judge as OK and clear the NG when the malfunction criteria below are met.

JUDGMENT VALUE

Malfunction Criteria Threshold Value
Camshaft position sensor signal = 3 time(s)

Time Needed for Diagnosis:  Engine two revolutions