LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Emission Control Systems (Aux. Emission Control Devices) (H6DO)) >> Leak Check Valve Assembly >> Inspection >> Check Vacuum Pump

Check Vacuum Pump

WARNING: This page is about a different variant/trim than selected.
  1. Connect the battery positive terminal to terminal No. 3 and the battery ground terminal to terminal No. 4, and inspect the vacuum pump operation.
    CAUTION: Do not operate the vacuum pump for 5 minutes or more.
    Fig 1: Checking Vacuum Pump Connector Terminals
    G08539014Courtesy of SUBARU OF AMERICA, INC.