ATF Cooler Pipe and Hose: Inspection
WARNING: This page is about a different variant/trim than selected.
Repair or replace each faulty ATF hose, ATF cooler pipes, clamps, and washers found in the inspection below.
- Check for ATF leaks in joints between the transmission, radiator, ATF cooler pipes, and ATF hoses.
- Check the clamp for deformation.
- Lightly bend the ATF hose and check for cracks on the surface or other damages.
- Pinch the ATF hose with your fingers and check for poor elasticity.
- Check for peeling, cracks, and deformation at the tip of the ATF hose.