Diagnostic Procedure With Phenomenon
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
| Phenomenon | Check item | Reference | |
|---|---|---|---|
| 1 | Cruise control main switch is not turned to ON. (Cruise indicator light does not illuminate.) Or, the cruise control was released without operating the cruise control main switch. | (1) Perform cruise cancel conditions diagnosis. | Perform the diagnosis according to displayed cancel code. |
| (2) Perform the real-time diagnosis. | Check the input signal of cruise control system. | ||
| (3) Check the cruise control command switch. | < Refer to 11 , Diagnostic Procedure with Cancel Code. > | ||
| (4) Check the cruise indicator light. | < Refer to CHECK CRUISE INDICATOR LIGHT AND CRUISE SET INDICATOR LIGHT , Diagnostics with Phenomenon. > | ||
| 2 | Cruise control cannot be set. Or, the cruise control was released without a releasing operation. | (1) Perform cruise cancel conditions diagnosis. | Perform the diagnosis according to displayed cancel code. |
| (2) Perform the real-time diagnosis. | Check the input signal of cruise control system. | ||
| (3) Check the cruise control command switch. | < Refer to 11 , Diagnostic Procedure with Cancel Code. > | ||
| (4) Check stop light switch and brake switch. | < Refer to BRAKE PEDAL . >< Refer to 12 , Diagnostic Procedure with Cancel Code. > | ||
| (5) Check clutch switch. | < Refer to CLUTCH SWITCH . >< Refer to 13 , Diagnostic Procedure with Cancel Code. > | ||
| (6) Check the neutral position switch. | < Refer to 14 , Diagnostic Procedure with Cancel Code. >< Refer to 62 , Diagnostic Procedure with Cancel Code. > | ||
| (7) Check vehicle speed sensor. | < Refer to 22 , Diagnostic Procedure with Cancel Code. > | ||
| 3 | Cruise set indicator light does not illuminate. | Check the cruise set indicator light. | < Refer to CHECK CRUISE INDICATOR LIGHT AND CRUISE SET INDICATOR LIGHT , Diagnostics with Phenomenon. > |
| 4 | Vehicle speed is not held within set speed ±3 km/h (±2 MPH). | Check the vehicle speed sensor. | < Refer to 22 , Diagnostic Procedure with Cancel Code. > |
| 5 | Vehicle speed does not increase or does not return to set speed after RESUME/ACCEL switch has been pressed. | (1) Perform the real-time diagnosis. | Check the input signal of cruise control system. |
| (2) Check the RESUME/ACCEL switch. | < Refer to 11 , Diagnostic Procedure with Cancel Code. > | ||
| 6 | Vehicle speed does not decrease after SET/COAST switch has been pressed. | (1) Perform the real-time diagnosis. | Check the input signal of cruise control system. |
| (2) Check the SET/COAST switch. | < Refer to 11 , Diagnostic Procedure with Cancel Code. > | ||
| 7 | Cruise control is not released after CANCEL switch has been pressed. | (1) Perform the real-time diagnosis. | Check the input signal of cruise control system. |
| (2) Check the CANCEL switch. | < Refer to 11 , Diagnostic Procedure with Cancel Code. > | ||
| 8 | Cruise control is not released after brake pedal has been depressed. | (1) Perform the real-time diagnosis. | Check the input signal of cruise control system. |
| (2) Check stop light switch and brake switch. | < Refer to 12 , Diagnostic Procedure with Cancel Code. >< Refer to INSTALLATION , Stop Light Switch. > | ||
| 9 | Cruise control is not released after shifting to the neutral position. | (1) Perform the real-time diagnosis. | Check the input signal of cruise control system. |
| (2) Check the neutral position switch. | < Refer to 14 , Diagnostic Procedure with Cancel Code. >< Refer to INSPECTION , Inhibitor Switch. > | ||
| 10 | Cruise control is not released after clutch pedal has been depressed. | (1) Perform the real-time diagnosis. | Check the input signal of cruise control system. |
| (2) Check clutch switch. | < Refer to 13 , Diagnostic Procedure with Cancel Code. >< Refer to CLUTCH SWITCH , INSTALLATION, Clutch Switch. > | ||