Diagnostic Procedure with Cancel Code: 22: Trouble Symptom

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Cruise control cannot be set. (Cancelled immediately.)

Step	Check	Yes	No
1 CHECK ABS OR VDC WARNING LIGHT. Turn the ignition switch to ON. After the initial operation of the combination meter is completed, check whether the VDC warning light continues to illuminate.	Does the warning light continue to illuminate?	Check the VDCCM.< Refer to BASIC DIAGNOSTIC PROCEDURE . >	Go to step 2 .
2 CHECK DTC OF LAN COMMUNICATION CIRCUIT. Read the DTC of body integrated unit using Subaru Select Monitor.	Is DTC of low-speed CAN displayed?	Check the LAN communication circuit.	Replace the ECM.< Refer to ENGINE CONTROL MODULE (ECM) . >< Refer to ENGINE CONTROL MODULE (ECM) . >