Rearview Mirror: Installation
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
Install each part in the reverse order of removal.
NOTE:
If the mirror base is removed, install it in the following procedure.
- Clean the old adhesive completely.
- Align the mirror base with the mark on the windshield glass to install it.
- Make sure the mirror base is securely attached and then install the spring to it.
Adhesive:
- REPAIR KIT IN MR (Part No. 65029FC000) or equivalent